Search
×

Notes on the Installation of Chain Electric Hoist

Introduction to Chain Hoist:


The good performance, high reliability and low failure rate of the Chain Hoist are one of the important reasons why most people choose it. High performance can ensure efficiency and safety in operation. However, there are still many precautions before the first use of the Chain Hoist.


Introduction to installation steps of Chain Hoist:


1. Install the chain box before installing the Chain Hoist;


2. Connect the power cord.


When the power cord is connected, the power shall be cut off  in advance. At the same time, the ground wire shall be well grounded, otherwise the operator may feel electric shock when touching any part of the hoist or chain.


3. Lubricate the load chain of the Chain Hoist.


The lubrication degree of the chain is an important factor affecting the service life of the load chain. Timely and effective lubrication of the load chain can ensure the effective service life of the chain.


4. Check the chain arrangement.


For the Chain Hoist with a multi-row chain, you should ensure that the lower hook frame is not overturned. If it is overturned, return it to the normal state and ensure that the welded joints of the chain are arranged in a row. Never hang a load on a chain-twisted hoist.


5. Check the operating voltage.


Since the Chain Hoist is equipped according to the voltage specified by the user or higher voltage (only for dual voltage), such as 230 / 460 V, so it is necessary to check the wiring and confirm whether it meets the requirements of power supply voltage. If not, please refer to the manual for correction to meet the necessary working voltage requirements.


Reference website: https://cn.ytgrp.com/news/news103.html


Related Articles About Crane


News Products
EOT Crane
News